Gauntlet Legends (board issues?)

[Splynter]

Just a question. I inherited a gauntlet legacy board a while ago. I
plugged it in to test today (because i'm building a gauntlet game for
it) and it comes up great. The only problem is - none of the buttons
seem to work. The joysticks and start buttons work - but none of the
three buttons to actually play.

It's not the cabinet - any other jamma pcb I plug in works just fine.
Any clues? Is there a dip setting I'm missing or something like that?

I'm going to try and hunt down a manual - but I thought I'd ask here
first.

Thanks,

- Ryan

[Splynter]

Just in case anyone wonders i fixed the problem.

The manual has some mis-prints in it. It mentions U13 and U14 - the
dips are really at U12 and U13. It mentions different things for a
couple of the dips.

Dip switch 4 on U12 switches from the midway harness to the standard
jamma harness. (in one part of the manual it says from 'normally open
to normally closed' in the other it says 'from midway harness to
standard harness')

It fixed the problem for me.