FA: Working Atari Battlezone PCB Board [BIN @ $99)

[Texas Arcade Parts]

FA: Working Atari Battlezone PCB Board [BIN @ $99)

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=13718&item=3292787684
http://tinyurl.com/26uup

Note: Board has a burnt edge connector. When tested, you hear all the
game sounds and can go through the motions of playing the game.
However, it plays blind. A simple soldering fix could bring this PCB
board back to life.

[AubHtr]

Post by Texas Arcade Parts
However, it plays blind. A simple soldering fix could bring this PCB
board back to life.

Well, it's not working. Maybe you could use 'partially working' in your title
instead of 'working'?

[Texas Arcade Parts]

Agreed ... or functional but not operational.

I was leaning more towards ...fucked up PCB Board but I didnt want to
offend the kiddos.

Post by AubHtr
Well, it's not working. Maybe you could use 'partially working' in your title
instead of 'working'?

[Mark (UK)]

Hi!

Is this auction just for the 6502 Analog Vector gen board, or is the
Battlezone Aux board and 24 way connector included as well?

Also, that connector burn is not in such a position that would cause the
game to play blind, that pin is the +5v which is needed for gameplay. It
must have another fault in the vector generator output somewhere.

Yours, Mark.

Post by Texas Arcade Parts
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=13718&item=3292787684
http://tinyurl.com/26uup
Note: Board has a burnt edge connector. When tested, you hear all the
game sounds and can go through the motions of playing the game.
However, it plays blind. A simple soldering fix could bring this PCB
board back to life.

[Texas Arcade Parts]

Mark.

No Aux PCB nor interconnect cable included.

Auction is just for the Video Gen Board

I'll try and troubleshoot this a bit more b4 the auction ends. I'll
put a voltmeter to the board while running to see if juice reaches the
+5V area. From the sounds of it, it's plays fine ....just blind.







On Sun, 16 May 2004 22:01:23 +0000 (UTC), "Mark (UK)"

Post by Mark (UK)
Hi!
Is this auction just for the 6502 Analog Vector gen board, or is the
Battlezone Aux board and 24 way connector included as well?
Also, that connector burn is not in such a position that would cause the
game to play blind, that pin is the +5v which is needed for gameplay. It
must have another fault in the vector generator output somewhere.
Yours, Mark.

Post by Texas Arcade Parts
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=13718&item=3292787684
http://tinyurl.com/26uup
Note: Board has a burnt edge connector. When tested, you hear all the
game sounds and can go through the motions of playing the game.
However, it plays blind. A simple soldering fix could bring this PCB
board back to life.